|
| STEP 1
Cut your MDF board to size. | |
|
| STEP 2
Lightly sand outer edges of the cut board. | |
|
| STEP 3
To create the design, lay the painter’s tape directly onto the unpainted/unprimed board - creating a vertical design. | |
|
| STEP 4
Prime the board spraying over the tape with the primer. | |
|
| STEP 5
Allow to fully cure per manufacturer’s recommendations. | |
|
| STEP 6
Once cured, spray paint over the taped primer. | |
|
| STEP 7
Two light coats may be needed. | |
|
| STEP 8
Remove tape gently while paint is still tacky about 10 minutes after you are done spraying. | |
